BLR Lightweight with Curved Grip (2)

With a timeless beauty that’s more than skin deep, the BLR Lightweight with Curved Grip is ready and waiting to be your next lever-action hunting rifle. The gloss finish on the Walnut curved grip stock contrasts beautifully with the deeply polished blue finish on the receiver and the barrel. The detachable box magazine allows it to be chambered for modern hunting calibers and it's tapped for scope mounts to take full advantage of it's range and accuracy. This is what a serious lever-action rifle should be, and what every other lever-action wishes it was.

NOTE: Unless specifically listed as included with a firearm, accessories shown such as scopes, optical sights, rings, ring mounts, optic rails, bipod rails, ammunition, etc. are NOT included. Accessories are available at authorized Browning dealers and here on Browning.com.

• The button-Rifled barrel is triple-checked for straightness and interior finish and then air-gauged to ensure a consistent diameter throughout the bore’s length.
  
• Every BLR barrel is individually finished with a hand-reamed chamber for tighter tolerances and more precise headspace.
• The barrel’s target-type Crown enables a more uniform release of gas as the bullet exits the muzzle, helping prevent any unwanted shift in bullet trajectory. The barrel Crown is recessed to help protect it from accidental impact damage that can degrade accuracy.
• The barrel’s standard sights include a Low-Profile adjustable square notch rear sight and a high-visibility front blade with gold bead fitted on a raised ramp-style base.
• The richly blued steel finish on all external surfaces is a stunning reflection of the gunmaker’s art.
• The aircraft grade alloy receiver is precision machined to provide outstanding reliability and years of dependable service.
• The slick-sided receiver houses the BLR’s lightning fast, glass-smooth rack and pinion lever action.
• The BLR has a rotating multi-lug bolt head that locks into the barrel extension to produce bolt-action accuracy and magnum-level strength.
• The BLR is one of the few lever-action rifle designs that is strong enough to use today’s most popular magnum cartridges, giving you the extended reach and flat bullet trajectory other lever-action owners can only dream of.
• The BLR has a recessed bolt face that surrounds the cartridge head for added strength and lasting dependability.
• The BLR’s generously-sized side ejection port allows fired cases to instantly clear the action without hitting you or your scope and bouncing back onto the receiver, potentially creating a jam.
• The folding hammer on the BLR provides an added measure of safety when the hammer is at half-cock, having two positions in that mode so the status of the rifle can be instantly seen and felt.
• The folding hammer on the BLR has four basic positions; Full-cock, half-cock, folded hammer position and the dropped or fired position.
• The BLR’s trigger is unique in that it travels along with the lever as it’s cycled, meaning that pinching your fingers between the lever and trigger on closing the action is a thing of the past.
• The fingerpiece on the BLR’s trigger is nice and wide with vertical friction ribs to prevent your finger from slipping, giving you more precise trigger control for those demanding long-range shots.
• The detachable steel box magazine makes for quick reloading, both in the field and on the range.
• Unlike lever actions with tubular magazines, the BLR’s detachable steel box magazine lets you use aerodynamically-superior pointed bullets, which opens up a whole new world of ballistic performance that is usually found in bolt-action and autoloading rifles.
• Magazine capacity is 3 rounds in the magnum calibers and 4 rounds in standard calibers.
• The BLR’s stock is sculpted from fine Walnut and the cut checkering in the grip and fore-end is crisply executed for lasting good looks and a more solid grip.
• The curved grip BLR stock is contoured for maximum comfort and the flared Schnabel fore-end tip adds a classic touch of style.
• The BLR’s stock has a deep, glossy finish that brings out every nuance of the wood’s warm color and grain.
• The well-formed recoil pad helps reduce felt recoil and flinching.
• Steel sling swivel studs are pre-installed for easy mounting of your sling or bipod.